Configuration Guide User guide

FastIron Configuration Guide 303
53-1002494-02
Brocade IronStack management
Other: 1, ACK: 0, WND: 0, ACK+WND: 0
DAT: 242, DAT+ACK: 0, DAT+WND: 0, DAT+ACK+WND: 0
Data retransmits done: 0, Zero-window probes sent: 0
Dup ACK pkts rcvd: 4, Pkts rcvd w/dup data: 0
Pkts rcvd w/data past window: 0
Session statistics, unit 3, channel 6:
Session state: established (last established 32 minutes 17 seconds ago)
Connections established: 1
Remote resets: 0, Reset packets sent: 0
Connection statistics (for current connection, if established):
Msgs sent: 2, Msgs received: 2
Atomic batches sent: 0, Atomic batches received: 0
Pkts sent: 8, Pkts received: 13
Msg bytes sent: 123, Msg bytes received: 20
Pkt bytes sent: 232, Pkt bytes received: 296
Flushes requested: 2, Suspends: 0, Resumes: 0
Packets sent with data (DAT), ACKs, and window updates (WND):
Other: 5, ACK: 1, WND: 0, ACK+WND: 0
DAT: 2, DAT+ACK: 0, DAT+WND: 0, DAT+ACK+WND: 0
Data retransmits done: 0, Zero-window probes sent: 0
Dup ACK pkts rcvd: 6, Pkts rcvd w/dup data: 0
Pkts rcvd w/data past window: 0
Brocade#
Syntax: show stack rel-ipc unit <num>
Displaying stack neighbors information
The show stack neighbors command displays information about stack member neighbors. The
following output is from a Brocade ICX 6610 switch.
Brocade# show stack neighbors
U# Stack-port1 Stack-port2
1 unit7 (7/2/1-7/2/5) unit2 (2/2/6-2/2/10)
2 unit3 (3/2/1-3/2/5) unit1 (1/2/6-1/2/10)
3 unit2 (2/2/1-2/2/5) unit4 (4/2/6-4/2/10)
4 unit5 (5/2/1-5/2/5) unit3 (3/2/6-3/2/10)
5 unit4 (4/2/1-4/2/5) unit6 (6/2/1-6/2/5)
6 unit5 (5/2/6-5/2/10) unit7 (7/2/6-7/2/10)
7 unit1 (1/2/1-1/2/5) unit6 (6/2/6-6/2/10)
Topology: Ring, 7 unit(s), order: 4 3 2 1 7 6 5
active
+---+ +---+ +---+ +---+ +---+ +---+
=2/1| 4 |2/6==2/6| 3 |2/1==2/1| 2 |2/6==2/6| 1 |2/1==2/1| 7 |2/6==2/6| 6 |2/1=
| +---+ +---+ +---+ +---+ +---+ +---+ |
| |
| standby |