Configuration Guide User guide

304 FastIron Configuration Guide
53-1002494-02
Brocade IronStack management
| +---+ |
------------------------------------------------------------------2/1| 5 |2/6=
+---+
Syntax: show stack neighbors
Table 50 describes the output from the show stack neighbors command.
Displaying stack port information
The show stack stack-ports command displays information about stack port status.
For ICX devices, it displays an equals sign (=) to show connections between trunk ports and is
enhanced to display the port up state of all trunked ports. The following example is observed on a
Brocade ICX 6610 switch.
Brocade#show stack stack-ports
active
+---+ +---+ +---+ +---+ +---+ +---+
=2/1| 4 |2/6==2/6| 3 |2/1==2/1| 2 |2/6==2/6| 1 |2/1==2/1| 7 |2/6==2/6| 6 |2/1=
| +---+ +---+ +---+ +---+ +---+ +---+ |
| |
| standby |
| +---+ |
------------------------------------------------------------------2/1| 5 |2/6=
+---+
U# Stack-port1 Stack-port2
1 up (1/2/1-1/2/5) up (1/2/6-1/2/10)
up ports: 1/2/1, 1/2/2, 1/2/3, 1/2/4, 1/2/5
up ports: 1/2/6, 1/2/7, 1/2/8, 1/2/9, 1/2/10
2 up (2/2/1-2/2/5) up (2/2/6-2/2/10)
up ports: 2/2/1, 2/2/2, 2/2/3, 2/2/4, 2/2/5
up ports: 2/2/6, 2/2/7, 2/2/8, 2/2/9, 2/2/10
3 up (3/2/1-3/2/5) up (3/2/6-3/2/10)
up ports: 3/2/1, 3/2/2, 3/2/3, 3/2/4, 3/2/5
up ports: 3/2/6, 3/2/7, 3/2/8, 3/2/9, 3/2/10
4 up (4/2/1-4/2/5) up (4/2/6-4/2/10)
up ports: 4/2/1, 4/2/2, 4/2/3, 4/2/4, 4/2/5
TABLE 50 Field descriptions for the show stack neighbors command
Field Description
U The stack identification number for this unit.
Stack-port1 Identifies the neighbor stack unit for stack-port1 for this unit ID.
Stack-port2 Identifies the neighbor stack unit for stack-port2 for this unit ID.
Brocade(config)# show stack stack-ports
ID Stack-port1 Stack-port2
1 up (1/2/1) up (1/2/2)
2 up (2/2/1) up (2/2/2)
3 up (3/2/1) up (3/3/1)
4 up (4/2/1) up (4/3/1)
5 up (5/2/1) up (5/3/1)