Configuration Guide User guide
FastIron Configuration Guide 309
53-1002494-02
Brocade IronStack management
NOTE
If a unit is provisional (reserved; and does not have a physical unit associated with the unit ID), its
interface MAC address shows as 0000.0000.0000
Displaying stacking port statistics
The show statistics stack-ports command displays information about all stacking ports in an
IronStack topology.
Brocade# show statistics stack-ports
Port In Packets Out Packets In Errors Out Errors
1/2/1 22223 4528 0 0
1/2/2 35506 3844 0 0
2/2/1 3161 34173 0 0
2/2/2 24721 3676 0 0
3/2/1 3048 23881 0 0
3/2/2 13540 2857 0 0
4/2/1 2862 13537 0 0
4/2/2 3626 3184 0 0
5/2/1 3183 3621 0 0
5/2/2 3265 13508 0 0
6/2/1 14020 3655 0 0
6/3/1 3652 17705 0 0
7/2/1 17705 3658 0 0
7/3/1 4047 21802 0 0
TOTAL 154559 153629 0 0
Syntax: show statistics stack-ports
Table 54 describes the fields displayed by the show statistics stack-ports command.
Displaying stacking topology
The show stack connection command displays the topology and prints out a detailed connection
report. It also prints connection errors or hardware failures, as shown in the following example
output from a Brocade ICX 6610 switch.
Brocade#show stack connection
Probing the topology. Please wait ...
Brocade#
active
+---+ +---+ +---+ +---+ +---+ +---+
=2/1| 4 |2/6==2/6| 3 |2/1==2/1| 2 |2/6==2/6| 1 |2/1==2/1| 7 |2/6==2/6| 6 |2/1=
| +---+ +---+ +---+ +---+ +---+ +---+ |
| |
TABLE 54 Field definitions for the show statistics stack-ports command
Field Description
Port The stack identification number for this unit.
In Packets The number of incoming packets on this port
Out Packets The number of outgoing packets on this port
In Errors The number of incoming errors on this port
Out Errors The number of outgoing errors on this port