Configuration Guide User guide

FastIron Configuration Guide 401
53-1002494-02
Displaying global IPv6 information
Displaying the IPv6 route table
To display the IPv6 route table, enter the following command at any CLI level.
Syntax: show ipv6 route [<ipv6-address> | <ipv6-prefix>/<prefix-length> | bgp | connect | ospf |
rip | static | summary]
The <ipv6-address> parameter restricts the display to the entries for the specified IPv6 address.
You must specify the <ipv6-address> parameter in hexadecimal using 16-bit values between
colons as documented in RFC 2373.
The <ipv6-prefix>/<prefix-length> parameters restrict the display to the entries for the specified
IPv6 prefix. You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values
between colons as documented in RFC 2373. You must specify the <prefix-length> parameter as a
decimal value. A slash mark (/) must follow the <ipv6-prefix> parameter and precede the
<prefix-length> parameter.
The bgp keyword restricts the display to entries for BGP4 routes.
The connect keyword restricts the display to entries for directly connected interface IPv6 routes.
The ospf keyword restricts the display to entries for OSPFv3 routes.
The rip keyword restricts the display to entries for RIPng routes.
The static keyword restricts the display to entries for static IPv6 routes.
The summary keyword displays a summary of the prefixes and different route types.
Age The number of seconds the entry has remained unused. If this value
remains unused for the number of seconds specified by the ipv6 nd
reachable-time command (the default is 30 seconds), the entry is
removed from the table.
Port The physical port on which the entry was learned.
vlan The VLAN on which the entry was learned.
IsR Determines if the neighbor is a router or host:
0 – Indicates that the neighbor is a host.
1 – Indicates that the neighbor is a router.
TABLE 69 IPv6 neighbor information fields (Continued)
Field Description
Brocade#show ipv6 route
IPv6 Routing Table - 7 entries:
Type Codes: C - Connected, S - Static, R - RIP, O - OSPF, B - BGP
OSPF Sub Type Codes: O - Intra, Oi - Inter, O1 - Type1 external, O2 - Type2
external
Type IPv6 Prefix Next Hop Router Interface Dis/Metric
C 2000:4::/64 :: ethe 3/2 0/0
S 2002::/16 :: tunnel 6 1/1
S 2002:1234::/32 :: tunnel 6 1/1
C 2002:c0a8:46a::/64 :: ethe 3/2 0/0
C 2999::1/128 :: loopback 2 0/0
O 2999::2/128 fe80::2e0:52ff:fe91:bb37 ethe 3/2 110/1
C 5000:2::/64 :: tunnel 2 0/0