Configuration Guide User guide

FastIron Configuration Guide 411
53-1002494-02
Chapter
9
FWS Series Switch IPv6 management
Table 75 lists the individual Brocade FastIron switches and the IPv6 management features they
support. These features are supported in the Layer 2, base Layer 3, edge Layer 3, and full Layer 3
software images, except where explicitly noted.
1
The following IPv6 management features, listed in Table 75, are documented in other chapters of
this guide:
• IPv6 copy – “Using the IPv6 copy command” on page 87
• IPv6 ncopy – “IPv6 ncopy command” on page 89
• RADIUS – “Setting RADIUS over IPv6” on page 167
• TFTP – “Loading and saving configuration files with IPv6” on page 87
This chapter describes the IPv6 management features, including command syntax and
management examples.
TABLE 75 Supported IPv6 management features
Feature FESX
FSX 800
FSX 1600
FWS FCX ICX
Link-Local IPv6 address For information about
IPv6 management
features on FastIron X
Series switches, refer to
Chapter 8, “IPv6
Configuration on FastIron
X Series, FCX, and ICX
Series Switches”.
Yes For information about
IPv6 management
features on Brocade
FCX Series switches,
refer to Chapter 8,
“IPv6 Configuration
on FastIron X Series,
FCX, and ICX Series
Switches”
For information
about IPv6
management
features on ICX
switches, refer to
Chapter 8, “IPv6
Configuration on
FastIron X Series,
FCX, and ICX
Series Switches”
IPv6 copy
1
Yes
IPv6 ncopy
1
Yes
IPv6 debug Yes
IPv6 access-list (management
ACLs)
Yes
IPv6 ping Yes
IPv6 traceroute Yes
DNS server name resolution Yes
HTTP/HTTPS Yes
Logging (Syslog) Yes
RADIUS
1
Yes
SCP Yes
SSH Yes
SNMP Yes
SNMP traps Yes
SNTP Yes
Telnet Yes
TFTP
1
Yes