Configuration Guide User guide

440 FastIron Configuration Guide
53-1002494-02
FDP Overview
Syntax: show fdp neighbor [ethernet <port>] [detail]
The ethernet <port> parameter lists the information for updates received on the specified port.
The detail parameter lists detailed information for each device.
The show fdp neighbor command, without optional parameters, displays the following information.
To display detailed information, enter the show fdp neighbor detail command.
The show fdp neighbor detail command displays the following information.
TABLE 78 Summary FDP and CDP neighbor information
This line... Displays...
Device ID The hostname of the neighbor.
Local Int The interface on which this Brocade device received an FDP or CDP
update for the neighbor.
Holdtm The maximum number of seconds this device can keep the information
received in the update before discarding it.
Capability The role the neighbor is capable of playing in the network.
Platform The product platform of the neighbor.
Port ID The interface through which the neighbor sent the update.
Brocade# show fdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
(*) indicates a CDP device
Device ID Local Int Holdtm Capability Platform Port ID
-------------- ------------ ------ ---------- ----------- -------------
FastIronB Eth 2/9 178 Router FastIron Rou Eth 2/9
BrocadeA# show fdp neighbor detail
Device ID: FastIronB configured as default VLAN1, tag-type8100
Entry address(es):
IP address: 192.168.0.13
IPv6 address (Global): c:a:f:e:c:a:f:e
Platform: FastIron Router, Capabilities: Router
Interface: Eth 2/9
Port ID (outgoing port): Eth 2/9 is TAGGED in following VLAN(s):
9 10 11
Holdtime : 176 seconds
Version :
Foundry, Inc. Router, IronWare Version 07.6.01b1T53 Compiled on Aug 29
2002 at 10:35:21 labeled as B2R07601b1