Configuration Guide User guide

FastIron Configuration Guide li
53-1002494-02
About This Guide
Introduction
This guide describes the following product families from Brocade:
• FastIron X Series devices:
• FastIron Edge Switch X Series (FESX) Layer 2/Layer 3 switch
• FastIron Edge Switch X Series Expanded (FESXE) Layer 2/Layer 3 switch
• FastIron SX 800 and 1600 Layer 2/Layer 3 switches
• FastIron WS (FWS) Layer 2, base Layer 3, and EPREM devices
• Brocade FCX Series (FCX) Stackable Switch
• Brocade ICX™ 6610 (ICX 6610) Stackable Switch
• Brocade ICX 6430 Series (ICX 6430)
• Brocade ICX 6450 Series (ICX 6450)
This guide includes procedures for configuring the software. The software procedures show how to
perform tasks using the CLI. This guide also describes how to monitor Brocade products using
statistics and summary screens.
This guide applies to the FastIron models listed in Table 1.
Device nomenclature
Table 1 lists the terms (product names) contained in this guide and the specific set of devices to
which each term refers.
TABLE 1 FastIron family of switches
This name Refers to these devices
FastIron X Series Devices
NOTE:
The FastIron X Series product family includes compact switch models and chassis models. The compact models are referred to
as
FESX switches. The chassis models are referred to as the FastIron SX switches. Chassis systems have these models:
FastIron SX 800 and FastIron SX 1600.
FastIron Edge Switch X Series (FESX) FESX624, FESX624HF, FESX624-PREM, FESX624-PREM6, FESX624HF-PREM,
FESX624HF-PREM6, FESX648, FESX648-PREM, FESX648-PREM6
FastIron SX Management Modules FastIron SX 800/1600 Management modules with:
• 667MHz / 512MB
NOTE: For a complete list of the SX 800/1600 Management modules and their
part numbers, see the Brocade FastIron X Series Chassis Hardware
Installation Guide.