Configuration Guide User guide

FastIron Configuration Guide lvii
53-1002494-02
Command syntax conventions
Command syntax in this manual follows these conventions:
Notes, cautions, and danger notices
The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance or advice, emphasizes important information, or provides a reference
to related information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause
damage to hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to products to warn of these conditions
or situations.
Related publications
The following Brocade documents supplement the information in this guide:
• Brocade FCX, Brocade FastIron SX, Brocade ICX Web Management Interface User Guide
• Brocade ICX 6610 Series Hardware Installation Guide
• Brocade FastIron CX Hardware Installation Guide
• Brocade FastIron X Series Chassis Hardware Installation Guide
• Brocade FastIron Compact Switch Hardware Installation Guide
• Brocade FastIron Edge X-Series Hardware Installation Guide
• Brocade FastIron WS Switch Hardware Installation Guide
• Brocade ICX 6450, ICX 6430 Switch Hardware Installation Guide
command and
parameters
Commands and parameters are printed in bold.
[ ] Optional parameter.
variable Variables are printed in italics enclosed in angled brackets < >.
... Repeat the previous element, for example “member[;member...]”
| Choose from one of the parameters.