Configuration Guide User guide

FastIron Configuration Guide 521
53-1002494-02
Chapter
15
Network Monitoring
Table 94 lists the individual FastIron switches and the network monitoring features they support.
These features are supported in the Layer 2, base Layer 3, edge Layer 3, and full Layer 3 software
images, except where explicitly noted.
Basic system management
The following sections contain procedures for basic system management tasks.
Viewing system information
You can access software and hardware specifics for a Brocade Layer 2 Switch or Layer 3 Switch.
For software specifics, refer to “Software versions installed and running on a device” on page 72.
To view the software and hardware details for the system, enter the show version command. The
following shows an example output.
TABLE 94 Supported network monitoring features
Feature FESX
FSX 800
FSX 1600
FWS FCX ICX 6610 ICX 6430
ICX 6450
Traffic counters for outbound traffic Yes No No No Yes
Egress queue counters No No Yes Yes No
Remote monitoring (RMON) Yes Yes Yes Yes Yes
Specifying the maximum number of
entries allowed in the RMON Control Table
Yes No Yes Yes Yes
sFlow version 2 Yes Yes Yes Yes ICX 6450
only
sFlow version 5 (default) Yes Yes Yes Yes ICX 6450
only
sFlow support for IPv6 packets Yes Yes Yes Yes ICX 6450
only
Uplink utilization lists Yes Yes Yes Yes Yes