Configuration Guide User guide

528 FastIron Configuration Guide
53-1002494-02
Basic system management
Displaying enhanced traffic counter statistics
To display the traffic counters for outbound traffic, enter the show transmit-counter profiles
command.
NOTE
Once the enhanced traffic counters are displayed, the counters are cleared (reset to zero).
The following shows an example output.
Syntax: show transmit-counter values <number>
where <number> identifies a valid enhanced traffic counter and is a value from 1 – 64.
TABLE 96 Outbound traffic counter statistics
This line... Displays...
Transmitted frames
Known Unicast The number of known unicast packets transmitted.
Multicast & Unknown Unicast The number of multicast and unknown unicast packets transmitted.
Broadcast The number of broadcast packets transmitted.
Dropped Frames
Brocade#show transmit-counter values 1
Transmit Queue Counter Values for Counter 1:
Transmitted Frames:
Known Unicast : 17204
Multicast & Unknown Unicast : 2797
Broadcast : 5
Dropped Frames:
Bridge Egress Filtered : 2
Congestion Drops : 0
Brocade#show transmit-counter values 4
Transmit Queue Counter Values for Counter 4:
Transmitted Frames:
Known Unicast : 124
Multicast & Unknown Unicast : 2752
Broadcast : 0
Dropped Frames:
Bridge Egress Filtered : 37
Congestion Drops : 0