Configuration Guide User guide

FastIron Configuration Guide 557
53-1002494-02
About port regions
FastIron Edge Switch X448:
• Ports 1 – 12 belong to port region 0
• Ports 13 – 24 belong to port region 1
• Ports 25 – 36 belong to port region 2
• Ports 37 – 48 belong to port region 3
• Port 49 belongs to port region 4
• Port 50 belongs to port region 5
FCX and FWS device port regions
The port region rules for FWS and FCX devices are as follows:
• For all platforms, a 24-port Gbps module has one port region. In addition, any 10 Gbps ports
on the device also belong to this single port region.
• For all platforms, the 48-port Gbps module has two port regions:
- Ports 1 - 24 belong to port region 0
- Ports 25 - 48 belong to port region 1
• For FCX648 devices with two 10 Gbps XFP ports, and a two 10 Gbps CX4 stacking ports:
- The two 10 Gbps XFP ports belong to port region 0 (along with ports 1 -24 )
- The two 10 Gbps CX4 stacking ports belong to port region 1 (along with ports 25 - 48)
• For FCX648 devices with four 10 Gbps SFP+ ports:
- 10 Gbps SFP+ ports 3 and 4 belong to port region 0 (along with ports 1 -24 )
- 10 Gbps SFP+ ports 1 and 2 ports belong to port region 1 (along with ports 25 - 48)
ICX 6610 device port regions
• A 24-port Gbps has the following port regions:
- Ports 1-6 and SFP ports 1-4 belong to region 0
- Ports 7-12 and SFP ports 5-8 belong to region 1
- Ports 13-18 belong to region 2
- Ports 19-24 belong to region 3
• A 48-port Gbps has the following port regions:
- Ports 1-6 and 25-30 and SFP ports 1-4 belong to region 0
- Ports 7-12 and 31-36 and SFP ports 5-8 belong to region 1
- Ports 13-18 and 37-42 belong to region 2
- Ports 19-24 and 43-45 belong to region 3
ICX 6430 device port regions
• A 24-port Gbps module has one port region. The four SFP ports on the device also belong to
this single port region.