Configuration Guide User guide

FastIron Configuration Guide 667
53-1002494-02
Power over Ethernet overview
Filename refers to the name of the file, including the pathname.
FCX and ICX platforms
To install PoE firmware on FCX and ICX platforms, enter a command such as the following.
Brocade#inline power install-firmware stack-unit 1 tftp 10.120.54.161
fcx_poeplus_07400.fw
Syntax: inline power install-firmware stack-unit <unit-number> tftp <ip-address> <filename>
Stack-unit refers to the unit-id of the switch. If the switch is not a part of the stack, the unit number
will be the default value. The default value for stack-unit is 1.
ip-address refers to the IP address of the tftp server.
Filename refers to the name of the file, including the pathname.
If you want to install firmware on a stack, you need to install firmware on one switch at a time with
the above command.
Image file types
This section lists the PoE firmware file types supported and the procedure to install them on the
FCX, ICX, and FSX devices.
Installing PoE firmware
1. Place the PoE firmware on a TFTP server to which the Brocade device has access.
2. Copy the PoE firmware from the TFTP server into the switch. To do so, enter a command such
as the following.
Brocade#inline power install-firmware module 1 tftp 10.120.54.161
fsx_poe_07400.fw
The process of PoE installation begins. You should see output similar to the following.
PoE Info: Loading firmware from TFTP file fsx_poe_07400.fw........
PoE Info: Firmware in PoE module(s) in slot 1 will be installed now.
PoE Warning: Upgrading firmware in slot 1....DO NOT HOTSWAP OR POWER DOWN THE
MODULE.
TABLE 123 PoE Firmware files
Product PoE Firmware
1
1. The firmware files are specific to these devices only and are not interchangeable. For example, you cannot load
FCX PoE firmware on a FSX device, and vice versa.
FESX
FSX 800
FSX 1600
fsx_poe_07400.fw
FSX 800 with SX-FI648PP module
FSX 1600 with SX-FI648PP module
fsx_poeplus_07400.fw
FCX
ICX 6610
fcx_poeplus_07400.fw
ICX 6430
ICX 6450
icx64XX_poeplus_07400.fw