Configuration Guide User guide

FastIron Configuration Guide 683
53-1002494-02
Displaying Power over Ethernet information
Firmware Version The Interface module / slot number firmware version.
Cumulative port state data
NOTE: When you enable a port using the CLI, it may take 12 or more seconds before the operational state of that
port is displayed correctly in the show inline power output.
Slot The Interface module / slot number.
#Ports Admin-On The number of ports on the Interface module on which the inline power command
was issued.
#Ports Admin-Off The number of ports on the Interface module on which the inline power command
was not issued.
#Ports Oper-On The number of ports on the Interface module that are receiving inline power from the
PoE power supply.
#Ports Oper-Off The number of ports on the Interface module that are not receiving inline power from
the PoE power supply.
#Ports Off-Denied The number of ports on the Interface module that were denied power because of
insufficient power.
#Ports Off-No-PD The number of ports on the Interface module to which no PDs are connected.
#Ports Off-Fault The number of ports on the Interface module that are not receiving power because
of a subscription overload.
Total The totals for all of the fields in the Cumulative Port State Data report.
Cumulative port power data
Slot The Interface module / slot number.
#Ports Pri: 1 The number of PoE ports on the Interface module that have a PoE port priority of 1.
#Ports Pri: 2 The number of PoE ports on the Interface module that have a PoE port priority of 2.
#Ports Pri: 3 The number of PoE ports on the Interface module that have a PoE port priority of 3.
Power Consumption The total number of watts consumed by PoE power consuming devices, plus any
cable loss.
Power Allocation The number of watts allocated to the Interface module PoE ports. This value is the
sum of the ports’ default or configured maximum power levels, or power classes
automatically detected by the FastIron PoE device.
Power Budget The power budget allocated to the slot. The default value is 65535 watts. Any other
value indicates that the power budget was configured using the CLI command inline
power budget.
Total The totals for all of the fields in the Cumulative Port Power Data report.
TABLE 126 Field definitions for the show inline power detail command (Continued)
Column Definition