Configuration Guide User guide

FastIron Configuration Guide 717
53-1002494-02
Displaying trunk group configuration information
Viewing the first and last ports in a trunk group
Output for many of the show commands will show the first and last port in a trunk as
FirstPort-LastPort, if the ports are consecutive, and FirstPort*LastPort if the ports are not
consecutive. This output is shown in the following show mac command, which displays the first and
last ports.
Brocade#show mac
Total active entries from all ports = 1
MAC-Address Port Type Index
0007.e910.c201 1/1/7*1/1/21 Dynamic 2920
For a trunk group with members 1/1/7 to 1/1/9, the output from the show mac command
resembles the following.
Brocade#show mac
Total active entries from all ports = 1
MAC-Address Port Type Index
0007.e910.c201 1/1/7-1/1/9 Dynamic 2920
Tag Indicates whether the ports have 802.1Q VLAN tagging. The value can be Yes or No.
Priority Indicates the Quality of Service (QoS) priority of the ports. The priority can be a value
from 0 through 7.
Active Ports The number of ports in the trunk group that are currently active.
Ports The ports in the trunk group.
Link_Status The link status of each port in the trunk group.
LACP_Status Displays the status of the aggregate links, which could be one of the following states:
• Ready - The port is functioning normally in the trunk group and is able to transmit
and receive LACP packets.
• Expired - The time has expired (as determined by timeout values) and the port has
shut down because the port on the other side of the link has stopped transmitting
packets.
• Down - The port physical link is down.
For more information about this feature, refer to the section “Displaying and
determining the status of aggregate links” on page 731.
Load Sharing The number of traffic flows currently being load balanced on the trunk ports. All traffic
exchanged within the flow is forwarded on the same trunk port. For information about
trunk load sharing, refer to “Trunk group load sharing” on page 705.
TABLE 135 CLI trunk group information (Continued)
Field Description