Configuration Guide User guide

720 FastIron Configuration Guide
53-1002494-02
Dynamic link aggregation
FIGURE 67 Examples of valid aggregate links
The examples assume that link aggregation is enabled on all of the links between the Brocade
device on the left and the device on the right (which can be either a Brocade device or another
vendor device). The ports that are members of aggregate links in the examples are following the
configuration rules for trunk links on Brocade devices.
The Brocade rules apply to a Brocade device even if the device at the other end is from another
vendor and uses different rules. Refer to “Trunk group rules” on page 699.
Port1/1
Port1/2
Port1/3
Port1/4
Port1/5
Port1/6
Port1/7
Port1/8
Port1/1
Port1/2
Port1/3
Port1/4
Port1/5
Port1/6
Port1/7
Port1/8
Port1/1
Port1/2
Port1/3
Port1/4
Port1/5
Port1/6
Port1/7
Port1/8
Brocade ports enabled for link
aggregation follow the same rules
as ports configured for trunk groups.