Configuration Guide User guide

FastIron Configuration Guide 781
53-1002494-02
Routing between VLANs using virtual routing interfaces (Layer 3 switches only)
Brocade-B(config-vlan-ip-subnet)# ipx-network 7 ethernet_802.3
Brocade-B(config-vlan-ipx-network)# static ethernet 13 to 16
Brocade-B(config-vlan-ipx-network)# router-interface ve4
Brocade-B(config-vlan-ipx-network)# other-proto name block-other-protocols
Brocade-B(config-vlan-other-proto)# exclude ethernet 9 to 16
Brocade-B(config-vlan-other-proto)# no dynamic
Brocade-B(config-vlan-other-proto)# interface ve 3
Brocade-B(config-vif-3)# ip addr 1.1.7.1/24
Brocade-B(config-vif-3)# ip ospf area 0.0.0.0
Brocade-B(config-vif-3)# interface ve4
Brocade-B(config-vif-4)# vlan 4 name Bridged_ALL_Protocols
Brocade-B(config-vlan-4)# untagged ethernet 17 to 24
Brocade-B(config-vlan-4)# tagged ethernet 25 to 26
Brocade-B(config-vlan-4)# spanning-tree
Brocade-B(config-vlan-4)# ipx-network 4 ethernet_802.3
Brocade-B(config-vlan-ipx-network)# exit
Brocade-B(config-vlan-4)# vlan 5 name Rtr_BB_to_Bldg.1
Brocade-B(config-vlan-5)# tagged ethernet 25
Brocade-B(config-vlan-5)# no spanning-tree
Brocade-B(config-vlan-5)# router-interface ve5
Brocade-B(config-vlan-5)# vlan 7 name Rtr_BB_to_Bldg.3
Brocade-B(config-vlan-7)# tagged ethernet 26
Brocade-B(config-vlan-7)# no spanning-tree
Brocade-B(config-vlan-7)# router-interface ve6
Brocade-B(config-vlan-7)# interface ve5
Brocade-B(config-vif-5)# ip addr 1.1.4.2/24
Brocade-B(config-vif-5)# ip ospf area 0.0.0.0
Brocade-B(config-vif-5)# interface ve6
Brocade-B(config-vif-6)# ip addr 1.1.8.1/24
Brocade-B(config-vif-6)# ip ospf area 0.0.0.0
Brocade-B(config-vif-6)#
Configuring Layer 3 VLANs and virtual routing interfaces for FESX-C
Enter the following commands to configure FESX-C.
Brocade> en
No password has been assigned yet...
Brocade# config t
Brocade(config)# hostname FESX-C
Brocade-C(config)# router ospf
Brocade-C(config-ospf-router)# area 0.0.0.0 normal
Brocade-C(config-ospf-router)# vlan 2 name IP-Subnet_1.1.9.0/24
Brocade-C(config-vlan-2)# untagged ethernet 1 to 4
Brocade-C(config-vlan-2)# no spanning-tree
Brocade-C(config-vlan-2)# router-interface ve1
Brocade-C(config-vlan-2)# other-proto name block-other-protocols
Brocade-C(config-vlan-other-proto)# no dynamic
Brocade-C(config-vlan-other-proto)# exclude ethernet 1 to 4
Brocade-C(config-vlan-other-proto)# interface ve1
Brocade-C(config-vif-1)# ip addr 1.1.9.1/24
Brocade-C(config-vif-1)# ip ospf area 0.0.0.0
Brocade-C(config-vif-1)# vlan 8 name IPX_Network9
Brocade-C(config-vlan-8)# untagged ethernet 5 to 8
Brocade-C(config-vlan-8)# no span
Brocade-C(config-vlan-8)# ipx-net 9 ethernet_802.3