Configuration Guide User guide

786 FastIron Configuration Guide
53-1002494-02
Configuring protocol VLANs with dynamic ports
Brocade(config)# vlan 20 name IPX_VLAN by port
Brocade(config-vlan-10)# untagged ethernet 2/1 to 2/6
added untagged port ethe 2/1 to 2/6 to port-vlan 20.
Brocade(config-vlan-10)# ipx-network abcd ethernet_ii name Eng-LAN
Brocade(config-vlan-ipx-network)# dynamic
Brocade(config)# write memory
These commands create a port-based VLAN on chassis ports 2/1 – 2/6 named “Eng-LAN”,
configure an IPX network VLAN within the port-based VLAN, and then add ports from the port-based
VLAN dynamically.
Syntax: vlan <vlan-id> name <string> [by port]