Configuration Guide User guide
800 FastIron Configuration Guide
53-1002494-02
Super-aggregated VLAN configuration
Configuring aggregated VLANs on an edge device
To configure the aggregated VLANs on device A in Figure 87 on page 798, enter the following
commands.
Brocade(config)# vlan 101 by port
Brocade(config-vlan-101)# tagged ethernet 2/1
Brocade(config-vlan-101)# untagged ethernet 1/1
Brocade(config-vlan-101)# exit
Brocade(config)# vlan 102 by port
Brocade(config-vlan-102)# tagged ethernet 2/1
Brocade(config-vlan-102)# untagged ethernet 1/2
Brocade(config-vlan-102)# exit
Brocade(config)# vlan 103 by port
Brocade(config-vlan-103)# tagged ethernet 2/1
Brocade(config-vlan-103)# untagged ethernet 1/3
Brocade(config-vlan-103)# exit
Brocade(config)# vlan 104 by port
Brocade(config-vlan-104)# tagged ethernet 2/1
Brocade(config-vlan-104)# untagged ethernet 1/4
Brocade(config-vlan-104)# exit
Brocade(config)# vlan 105 by port
Brocade(config-vlan-105)# tagged ethernet 2/1
Brocade(config-vlan-105)# untagged ethernet 1/5
Brocade(config-vlan-105)# exit
Brocade(config)# write memory
Syntax: [no] vlan <vlan-id> [by port]
Syntax: [no] tagged ethernet [<slotnum>/]<portnum> [to [<slotnum>/]<portnum> | ethernet
[<slotnum>/]<portnum>]
Syntax: [no] untagged ethernet [<slotnum>/]<portnum> [to [<slotnum>/]<portnum> | ethernet
[<slotnum>/]<portnum>]
Use the tagged command to add the port that the device uses for the uplink to the core device. Use
the untagged command to add the ports connected to the individual clients.
Configuring aggregated VLANs on a core device
To configure the aggregated VLANs on device C in Figure 87 on page 798, enter the following
commands.
Brocade(config)# tag-type 9100
Brocade(config)# aggregated-vlan
Brocade(config)# vlan 101 by port
Brocade(config-vlan-101)# tagged ethernet 4/1
Brocade(config-vlan-101)# untagged ethernet 3/1
Brocade(config-vlan-101)# exit
Brocade(config)# vlan 102 by port
Brocade(config-vlan-102)# tagged ethernet 4/1
Brocade(config-vlan-102)# untagged ethernet 3/2
Brocade(config-vlan-102)# exit
Brocade(config)# write memory
Syntax: [no] tag-type <num>
Syntax: [no] aggregated-vlan