Configuration Guide User guide

FastIron Configuration Guide 861
53-1002494-02
Displaying MCT information
22
Syntax: show cluster <cluster-name/cluster-id> config
Displaying state machine information
Use the show cluster client command to display additional state machine information including the
reason for Local CCEP down. You can optionally specify an individual cluster and client.
Syntax: show cluster <cluster_name/cluster_id> client [<client_name/client_RbridgeID>]
Table 147 shows the reasons for local CCEP down.
TABLE 147 Reasons for Local CCEP down
Reason for Local CCEP
down
Meaning
client-interfaces
shutdown
Command is configured.
client-isolation strict Command is configured.
Deploy mismatch Client is not deployed remotely.
Slave state Client is in slave state when CCP is down.
cluster and client
undeployed
Neither the cluster nor client is deployed.
cluster undeployed Cluster is not deployed.
client undeployed Client is not deployed.
Brocade#show cluster 1 client
Cluster 1 1
===================
Rbridge Id: 101, Session Vlan: 3999, Keep-Alive Vlan: 4001
Cluster State: Deploy
Client Isolation Mode: Loose
Configured Member Vlan Range: 100 to 105
Active Member Vlan Range: 100 to 105
MCT Peer's Reachability status using Keep-Alive Vlan: Peer Reachable
Client Info:
------------
Client: c1, rbridge-id: 300, Deployed
Client Port: 3/11
State: Up
Number of times Local CCEP down: 0
Number of times Remote CCEP down: 0
Number of times Remote Client undeployed: 0
Total CCRR packets sent: 4
Total CCRR packets received: 3