Configuration Guide User guide

866 FastIron Configuration Guide
53-1002494-02
Displaying MCT information
22
OIF: TR(e5/4) tag TR(e5/5)
age=1s up-time=2005s, change=4s vidx=8187 (ref-cnt=1)
The following command displays status about the IGMP router port.
Brocade(config)#show ip multicast cluster vlan 100
Version=2, Intervals: Query=125, Group Age=260, Max Resp=10, Other Qr=260
VL100: cfg V3, vlan cfg passive, 1 grp, 2 (SG) cache, rtr ports,
router ports: e5/9(260) 100.100.100.1 (local:1, mct peer:0),
e5/4 has 1 groups,
This interface is non-Querier (passive)
default V3 trunk
(local:1, mct peer:0)
Syntax: show ip multicast cluster {group | mcache | vlan <vlan-id>}
Use the show ip multicast cluster pimsm-snooping command to display detailed information about
multicast snooping activity.
Brocade(config)#show ip multicast cluster pimsm-snooping
Example: Port: 7/3 (age, port type, ref_count, owner flag, pruned flag)
source: 7/3 has 1 src: 11.0.0.5(age, ref_count, owner flag, pruned flag)
owner flag: 0x0: local, 0x1 remote cep, 0x2 remote ccep
vlan 100, has 1 caches.
1 (* 224.10.10.10) has 2 pim join ports out of 2 OIF
7/3 (20, ICL, 1, 0x0, 0), 7/5 (20, CCEP, 1, 0x0, 0),
7/3 has 4 src: 11.0.0.5(20, 1, 0x0, 0), 11.0.0.4(20, 1, 0x0, 0), 11.0.0.3(20, 1,
0x0, 0), ...cut
7/5 has 4 src: 11.0.0.5(20, 1, 0x0, 0), 11.0.0.4(20, 1, 0x0, 0), 11.0.0.3(20, 1,
0x0, 0), ...cut
Syntax: show ip multicast cluster pimsm-snooping [group | vlan]
The following show ipv6 mld commands have output that is similar to the corresponding show ip
multicast commands.
MLD multicast group commands:
Brocade(config)#show ipv6 mld cluster group
MLD multicast mcache output:
Brocade(config)#show ipv6 mld mcache
MLD router port output:
Brocade(config)#show ipv6 mld cluster vlan 100
Syntax: show ipv6 mld cluster {group | mcache | vlan <vlan-id>}