Configuration Guide User guide

874 FastIron Configuration Guide
53-1002494-02
MCT configuration examples
22
DIST-A (R3) - Configuration
This example presents the configuration for the DIST-A(R3) cluster device in Table 105.
!
trunk ethe 1/1 to 1/2
trunk ethe 15/1 to 15/2
!
vlan 5 name session-vlan by port
tagged ethe 1/1 to 1/2
router-interface ve 5
!
vlan 6 name keep-alive-vlan by port
tagged ethe 11/25 to 11/36
router-interface ve 6
spanning-tree
!
!
vlan 1905 name MAC-scaling-vlan by port
tagged ethe 1/1 to 1/2 ethe 3/24 ethe 15/1 to 15/2
!
hostname R3
hitless-failover enable
!
interface ethernet 11/25
link-aggregate configure key 10001
link-aggregate active
!
…………………………………………………
!
interface ethernet 11/36
link-aggregate configure key 10001
link-aggregate active
!
interface ve 5
ip address 51.1.1.1 255.255.255.252
!
interface ve 6
ip address 61.1.1.1 255.255.255.248
!
cluster MCT2 2
rbridge-id 3
session-vlan 5
keep-alive-vlan 6
icl BH3 ethernet 1/1
peer 51.1.1.2 rbridge-id 4 icl BH3
deploy
client MCT1
rbridge-id 5
client-interface ethernet 15/1
deploy