Configuration Guide User guide

FastIron Configuration Guide 37
53-1002494-02
Configuring the device as an SNTP server
Syntax: show run interface
Use the show rate-limit unknown-unicast command to display the unknown unicast limit for each
port region to which it applies.
Example
Syntax: show rate-limit unknown-unicast
Use the show rate-limit broadcast command to display the broadcast limit or broadcast and
multicast limit for each port to which it applies.
Example
Syntax: show rate-limit broadcast
CLI banner configuration
Brocade devices can be configured to display a greeting message on users’ terminals when they
enter the Privileged EXEC CLI level or access the device through Telnet. In addition, a Brocade
device can display a message on the Console when an incoming Telnet CLI session is detected.
Setting a message of the day banner
You can configure the Brocade device to display a message on a user terminal when he or she
establishes a Telnet CLI session. For example, to display the message “Welcome to FESX!” when a
Telnet CLI session is established.
Brocade(config)# banner motd $ (Press Return)
Enter TEXT message, End with the character '$'.
Welcome to FESX! $
A delimiting character is established on the first line of the banner motd command. You begin and
end the message with this delimiting character. The delimiting character can be any character
except “ (double-quotation mark) and cannot appear in the banner text. In this example, the
delimiting character is $ (dollar sign). The text in between the dollar signs is the contents of the
banner. The banner text can be up to 4000 characters long, which can consist of multiple lines.
Syntax: [no] banner motd <delimiting-character>
To remove the banner, enter the no banner motd command.
Brocade# show rate-limit unknown-unicast
Unknown Unicast Limit Settings:
Port Region Combined Limit Packets/Bytes
1 - 12 524288 Packets
13 - 24 65536 Bytes
Brocade# show rate-limit broadcast
Broadcast/Multicast Limit Settings:
Port Limit Packets/Bytes Packet Type(s)
4 1245184 Bytes Broadcast + Multicast
5 1245184 Bytes Broadcast + Multicast
14 65536 Packets Broadcast only
23 131072 Packets Broadcast + Multicast