Configuration Guide User guide

FastIron Configuration Guide 893
53-1002494-02
Displaying GVRP information
NOTE
You cannot add the VLAN ports as untagged ports.
NOTE
After you convert the VLAN, the VLAN name changes from “‘GVRP_VLAN_<vlan-id>“ to
“STATIC_VLAN_<vlan-id>“.
ethernet <port> specifies a port. Specify the port variable in one of the following formats:
• FWS, FCX, and ICX stackable switches – stack-unit/slotnum/portnum
• FSX 800 and FSX 1600 chassis devices – slotnum/portnum
• ICX devices – slotnum/portnum
• FESX compact switches – portnum
To specify a list of ports, enter each port as ethernet <port> followed by a space. For example,
ethernet 1/24 ethernet 6/24 ethernet 8/17
To specify a range of ports, enter the first port in the range as ethernet <port> followed by the last
port in the range. For example, ethernet 1/1 to 1/8.
You can combine lists and ranges in the same command. For example: enable ethernet 1/1 to 1/8
ethernet 1/24 ethernet 6/24 ethernet 8/17.
Displaying GVRP information
You can display the following GVRP information:
• GVRP configuration information
• GVRP VLAN information
• GVRP statistics
• CPU utilization statistics
• GVRP diagnostic information