User Manual

54 Brocade FCoE Switch Module for IBM BladeCenter: Installation and User Guide
Environmental requirements
The information in Table 10 shows the operating and nonoperating requirements of the high speed
switch module.
CNA support
You can obtain up-to-date information about compatible CNA adapters and other IBM products at
http://www.ibm.com/systems/support/.
Fibre Channel Standards Compliance
The switch module meets or exceeds the Fibre Channel standards compliance, performance, and
feature capabilities as defined in the following standards when in fabric mode:
TABLE 10 Environment al requirements
Condition Operating Non-operating
Temperature (low
altitude)
0° to 40° C (32° to 104° F) -20° to 70° C (-4°F to 158° F)
Humidity 10% to 90% RH non-condensing at 29
° C 5% to 95% RH non-condensing at
38
° C
Altitude up to 3.048 km (10,000 ft) above sea level up to 10.688 km (35,000 ft) above
sea level
Shock 20G, 6ms 50G with a velocity change of 4216
mm/sec squared
Vibration 0.4G, 5-500 Hz, 60 minutes 0.5G, 2-200 Hz, 15 minutes; 1.04
GRMS Random for 15 minutes