Product Reference Guide (Supporting software release 4.4.0.0)

Brocade Mobility 5181 Access Point Product Reference Guide 205
53-1002516-01
Network Commands
8
Network LAN Commands
BR5181>admin(network.lan)>
Description
Displays the LAN submenu. The items available under this command are shown below.
For an overview of the LAN configuration options using the applet (GUI), see “Configuring the LAN
interface” on page 93.
BR5181>admin(network.lan)> show
Description
Displays the Mobility 5181 Access Point LAN settings.
Syntax
Example
admin(network.lan)>show
LAN On Ethernet Port : LAN1
LAN Ethernet Timeout : disable
802.1x Port Authentication:
Username : admin
Password : ********
Auto-negoitation : disable
Speed : 100M
Duplex : full
show
Shows current Mobility 5181 Access Point LAN parameters.
set
Sets LAN parameters.
bridge
Goes to the mesh configuration submenu.
wlan-mapping
Goes to the WLAN/Lan/Vlan Mapping submenu.
dhcp
Goes to the LAN DHCP submenu.
type-filter
Goes to the Ethernet Type Filter submenu.
ipfpolicy
Goes to the LAN IP Filtering Policy submneu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
show
Shows the settings for the Mobility 5181 Access Point LAN1 and LAN2 interfaces.