Product Reference Guide (Supporting software release 4.4.0.0)

Brocade Mobility 5181 Access Point Product Reference Guide 225
53-1002516-01
Network Commands
8
one to many nat mapping
-----------------------------------------------------------------------------
--
LAN No. WAN IP
-----------------------------------------------------------------------------
--
1 157.235.91.2
2 157.235.91.2
admin(network.wan.nat)>
For an overview of the NAT options available using the applet (GUI), see “Configuring Network
Address Translation (NAT) settings” on page 103.
BR5181>admin(network.wan.nat)> set
Description
Sets NAT inbound and outbound parameters.
Syntax
Example
admin(network.wan.nat)>set type 2 1-to-many
admin(network.wan.nat)>set ip 2 10.1.1.1 (this command is used when NAT is
1-to-1)
admin(network.wan.nat)>show 2
WAN IP Mode : enable
WAN IP Address : 157.235.91.2
NAT Type : 1-to-many
Inbound Mappings : Port Forwarding
unspecified port forwarding mode : enable
unspecified port fwd. ip address : 111.223.222.1
one to many nat mapping
-----------------------------------------------------------------------------
--
LAN No. WAN IP
-----------------------------------------------------------------------------
--
set type <index>
<type> Sets the type of NAT translation for WAN address index <idx> (1-8) to <type> (none,
1-to-1, or 1-to-many).
ip <index>
<ip> Sets NAT IP mapping associated with WAN address <idx> to the specified IP
address <ip>.
inb <index>
<ip>
<mode
>
Sets inbound IP address for specified index <index> <ip address>
Sets inbound mode for specified index <index> <enable/disable>
out
b
<index>
<ip>
<from
> <to>
Sets outbound IP address for specified index <index> <ip address>
Sets outbound NAT destination <LAN1 or LAN2> <WAN ip 1-8 or None>.