Product Reference Guide (Supporting software release 4.4.0.0)

Brocade Mobility 5181 Access Point Product Reference Guide 231
53-1002516-01
Network Commands
8
For information on configuring VPN using the applet (GUI), see “Configuring VPN tunnels” on
page 151.
salife
<name> <lifetime> Defines the name of the tunnnel <name> the Security
Association Life Time <300-65535> applies to in
seconds.
ike opmode <name> <opmode> Sets the Operation Mode of IKE for <name> to Main or
Aggr(essive).
myidtype
<name> <idtype> Sets the Local ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (IP, FQDN, or
UFQDN).
remidtyp
e
<name> <idtype> Sets the Remote ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (IP, FQDN, or
UFQDN).
myiddata
<name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required when
the ID type is set to IP.
remiddat
a
<name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required when
the ID type is set to IP.
authtype
<name> <authtype> Sets the IKE Authentication type for <name> to
<authtype> ( PSK or RSA).
authalgo
<name> <authalgo> Sets the IKE Authentication Algorithm for <name> to
MD5 or SHA1.
phrase
<name> <phrase> Sets the IKE Authentication passphrase for <name> to
<phrase>.
encalgo
<name> <encalgo> Sets the IKE Encryption Algorithm for <name> to
<encalgo> (one of DES, 3DES, AES128, AES192, or
AES256).
lifetime
<name> <lifetime> Sets the IKE Key life time in seconds for <name> to
<lifetime>.
group
<name> <group> Sets the IKE Diffie-Hellman Group for <name> to either
G768 or G1024.