Product Reference Guide (Supporting software release 4.4.0.0)

234 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
-----------------------------------------------------------------------------
Eng2EngAnnex Not Active
SJSharkey Not Active
For information on displaying VPN information using the applet (GUI), see “Viewing VPN status” on
page 159.
BR5181>admin(network.wan.vpn)> ikestate
Description
Displays statistics for all active tunnels using Internet Key Exchange (IKE).
Syntax
Example
admin(network.wan.vpn)>ikestate
----------------------------------------------------------------------
Tunnel Name IKE State Dest IP Remaining Life
----------------------------------------------------------------------
Eng2EngAnnex Not Connected ---- ---
SJSharkey Not Connected ---- ---
admin(network.wan.vpn)>
For information on configuring IKE using the applet (GUI), see “Configuring IKE key settings” on
page 157.
BR5181>admin(network.wan.content)>
Description
Displays the Outbound Content Filtering menu. The items available under this command include:
ikestate
Displays status about Internet Key Exchange (IKE) for all tunnels. In particular, the table indicates
whether IKE is connected for any of the tunnels, it provides the destination IP address, and the
remaining lifetime of the IKE key.
addcmd
Adds control commands to block outbound traffic.
delcmd
Deletes control commands to block outbound traffic.
list
Lists application control commands.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.