Product Reference Guide (Supporting software release 4.4.0.0)
242 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
ESS Identifier : 101
WLAN Name : Lobby
802.11a Radio : available
802.11b/g Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum Clients : 127
Client Idle Timeout : 30
Security Policy : Default
Client Access Control : Default
Kerberos User Name : 101
Kerberos Password : ********
Disallow Client to Client Communication : disable
Use Secure Beacon : disable
Accept Broadcast ESSID : disable
QoS Policy : Default
For information on displaying WLAN infromation using the applet (GUI), see “Enabling wireless
LANs (WLANs)” on page 106.
BR5181>admin(network.wireless.wlan)> create
Description
Defines the parameters of a new WLAN.
Syntax
create
show wlan <number>
Displays newly created WLAN and policy number.
set ess
<essid> Defines the ESSID for a target WLAN.
wlan-name
<name> Determines the name of this particlular WLAN (1-32).
11a
<mode> Enables or disables access to the Mobility 5181 Access Point
802.11a radio.
11bg
<mode> Enables or disables access to the Mobility 5181 Access Point
802.11b/g radio.
mesh
<mode> Enables or disables the Client Bridge Mesh Backhaul option.
hotspot
<mode> Enables or disables the Hotspot mode.
max-Client
<number> Defines the maximum number of Client able to operate within the
WLAN (default = 127 Clients).
idle-timeout
<number> Sets the Client idle tmeout in minutes. The default value is 30
minutes.
security
<name> Sets the security policy to the WLAN (1-32).
acl
<name> Sets the Client ACL policy to the WLAN (1-32).
passwd
<ascii
string>
Defines a Kerberos password used if the WLAN’s security policy
uses a Kerberos server-based authentication scheme.