Product Reference Guide (Supporting software release 4.4.0.0)

Brocade Mobility 5181 Access Point Product Reference Guide 251
53-1002516-01
Network Commands
8
admin(network.wireless.security)>show policy 1
Policy Name : Default
Authentication : Manual Pre-shared key/No Authentication
Encryption type : no encryption
Related Commands
For information displaying existing WLAN security settings using the applet (GUI), see “Only a
qualified installation professional should set or restore the access point’s radio and power
management configuration in the event of a password reset.” on page 133.
BR5181>admin(network.wireless.security)> create
Description
Defines the parameter of Mobility 5181 Access Point security policies.
Syntax
create
Defines security parameters for the specified WLAN.
create
Defines the parameters
of a security policy.
show
Displays new or existing
security policy
parameters.
set sec-name
<name> Sets the name of the
security policy.
auth
<authtype> Sets the authentication
type for WLAN <idx> to
<type> (none, eap, or
kerberos).
Note: Kerberos
parameters are only in
affect if "kerberos" is
specified for the
authentication method
(set auth <type>).
kerb realm
<name> Sets the Kerberos realm.