Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 99
53-1001947-01
Chapter
5Network Management
In this chapter
•Configuring the LAN interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
•Configuring WAN settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
•Enabling Wireless LANs (WLANs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
•Configuring router settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
•Configuring IP filtering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Configuring the LAN interface
The Brocade Mobility 7131N-FGR Access Point has one physical LAN port supporting two unique
LAN interfaces. The Brocade Mobility 7131N-FGR Access Point LAN port has its own MAC address.
The LAN port MAC address is always the value of the Brocade Mobility 7131N-FGR Access Point
WAN port MAC address plus 1. The LAN and WAN port MAC addresses can be located within the
LAN and WAN Stats screens.
For information on locating the access point’s MAC addresses, see “Viewing WAN statistics” on
page 216 and “Viewing LAN statistics” on page 218.
Use the LAN Configuration screen to enable one (or both) of the access point’s LAN interfaces,
assign them names, define which LAN is currently active on the access point Ethernet port and
assign a timeout value to disable the LAN connection if no data traffic is detected within a defined
interval.
To configure the Brocade Mobility 7131N-FGR Access Point LAN interface: