Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

174 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring firewall settings
6
3. Configure the Rules field as required to allow or deny access to selected (enabled) protocols.
Color Access Type Description
Green Full Access No protocol exceptions (rules) are specified. All traffic may
pass between these two areas.
Yellow Limited Access One or more protocol rules are specified. Specific
protocols are either enabled or disabled between these
two areas. Click the table cell of interest and look at the
exceptions area in the lower half of the screen to
determine the protocols that are either allowed or denied.
Red No Access All protocols are denied, without exception. No traffic will
pass between these two areas.