Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

264 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan.wlan-mapping)> show
Displays the VLAN list currently defined for the Brocade Mobility 7131N-FGR Access Point.. These
parameters are defined with the set command.
Syntax
Example
admin(network.lan.wlan-mapping)>show name
-----------------------------------------------------------------------------
Index VLAN ID VLAN Name
-----------------------------------------------------------------------------
1 1 VLAN_1
2 2 VLAN_2
3 3 VLAN_3
4 4 VLAN_4
admin(network.lan.wlan-mapping)>show vlan-cfg
-----------------------------------------------------------------------------
LAN No. Management VLAN Tag Native VLAN Tag
-----------------------------------------------------------------------------
111
211
WLAN :WLAN1
mapped to VLAN :<none>
VLAN Mode :static
admin(network.lan.wlan-mapping)>show lan-wlan
WLANs on LAN1:
:WLAN1
:WLAN2
:WLAN3
WLANs on LAN2:
admin(network.lan.wlan-mapping)>show wlan
Warning: This will display secure information,
Do you want to continue? (n/y?)y
WLAN1:
WLAN Name :WLAN1
ESSID :101
Radio Bands :2.4 and 5.0 GHz
VLAN :
Security Policy :Default
QoS Policy :Default
Rate Limiting :disabled
show name
Displays the existing list of VLAN names.
vlan-cfg
Shows WLAN-VLAN mapping and VLAN configuration.
lan-wlan
Displays a WLAN-LAN mapping summary.
wlan
Displays the WLAN summary list.