Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 273
53-1001947-01
Network commands
8
BR7131N>admin(network.lan.dhcp)> show
Shows DHCP parameter settings.
Syntax
Example
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
**LAN2 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
For information on configuring DHCP using the applet (GUI), see “Configuring the LAN interface” on
page 99.
show
Displays DHCP parameter settings for the Brocade Mobility 7131N-FGR Access Point. These
parameters are defined with the set command.