Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

296 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
For information on configuring VPN using the applet (GUI), see “Configuring VPN tunnels” on
page 178.
salife
<name> <lifetime> Defines the name of the tunnnel <name> the
Security Association Life Time <300-65535>
applies to in seconds.
ike opmode
<name> <opmode> Sets the Operation Mode of IKE for <name> to
Main or Aggr(essive).
myidtype
<name> <idtype> Sets the Local ID type for IKE authentication
for <name> (1 to 13 characters) to <idtype>
(IP, FQDN, or UFQDN).
remidtype
<name> <idtype> Sets the Remote ID type for IKE authentication
for <name> (1 to 13 characters) to <idtype>
(IP, FQDN, or UFQDN).
myiddata
<name> <idtype> Sets the Local ID data for IKE authentication
for <name> to <idtype>. This value is not
required when the ID type is set to IP.
remiddata
<name> <idtype> Sets the Local ID data for IKE authentication
for <name> to <idtype>. This value is not
required when the ID type is set to IP.
authtype
<name> <authtype
>
Sets the IKE Authentication type for <name> to
<authtype> ( PSK or RSA).
authalgo
<name> <authalgo
>
Sets the IKE Authentication Algorithm for
<name> to MD5 or SHA1.
phrase
<name> <phrase> Sets the IKE Authentication passphrase for
<name> to <phrase>.
encalgo
<name> <encalgo> Sets the IKE Encryption Algorithm for <name>
to <encalgo> (one of DES, 3DES, AES128,
AES192, or AES256).
lifetime
<name> <lifetime> Sets the IKE Key life time in seconds for
<name> to <lifetime>.
group
<name> <group> Sets the IKE Diffie-Hellman Group for <name>
to either G768 or G1024.