Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 307
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.dyndns)> set
Sets the access point’s Dynamic DNS configuration.
Syntax
Example
admin(network.wan.dyndns)>set mode enable
admin(network.wan.dyndns)>set username percival
admin(network.wan.dyndns)>set password mudskipper
admin(network.wan.dyndns)>set host greengiant
For an overview of the Dynamic DNS options available using the applet (GUI), see “Configuring
Dynamic DNS” on page 118.
set mode enable/disable
Enables or disbales the Dynamic DNS service for the access
point.
username <name>
Enter a 1 - 32 character username for the account used for
the access point.
password <password>
Enter a 1 - 32 character password for the account used for
the access point.
hostname <host>
Enter a 1 - 32 character hostname for the account used for
the access point.