Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

312 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.wlan)> show
Displays the Brocade Mobility 7131N-FGR Access Point’s current WLAN configuration.
Syntax
Example
admin(network.wireless.wlan)>show summary
Warning: This will display secure information,
Do you want to continue? (n/y?)y
WLAN1
WLAN Name : Lobby
ESSID : 101
Radio Bands : 2.4 and 5.0 GHz
VLAN : <none>
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
admin(network.wireless.wlan)>show wlan 1
Warning: This will display secure information,
Do you want to continue? (n/y?)
ESS Identifier : 101
WLAN Name : Lobby
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control : Default
disallow MU to MU Communication : disable
Use Secure Beacon : disable
answer Broadcast ESSID : enable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
For information on displaying WLAN infromation using the applet (GUI), see “Enabling Wireless
LANs (WLANs)” on page 119.
show summary
Displays the current configuration for existing WLANs.
wlan <number>
Displays the configuration for the requested WLAN (WLAN 1 through
16).