Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

314 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
ESS Identifier :
WLAN Name :
802.11n (5.0 GHz) Radio : available
802.11n (2.4 GHz) Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
MU Idle Timeout : 30
Security Policy : Default
MU Access Control :
disallow MU to MU : disable
Use Secure Beacon : disable
answer Broadcast ESSID : disable
QoS Policy : Default
per-mu rate limiting : disabled
per-mu rate limit (wired-to-wl) : 1000 kb
per-mu rate limit (wl-to-wired) : 1000 kb
admin(network.wireless.wlan.create)>show security
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual WPA2/CCMP Front Lobby
WPA Countermeasure enable
admin(network.wireless.wlan.create)>show acl
----------------------------------------------------------------------
ACL Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Admin 3rd Floor
3 Demo Room 5th Floor
admin(network.wireless.wlan.create)>show qos
----------------------------------------------------------------------
QOS Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Voice Audio Dept
3 Video Video Dept
The CLI treats the following as invalid characters, thus they should not be used in the creation of an
ESSID (or other):
' " \ & $ ^ * + ? [ ( { | , < >
For information on creating a WLAN using the applet (GUI), see “Creating/editing individual WLANs”
on page 121.