Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual
Brocade Mobility 7131N-FGR Product Reference Guide 333
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.acl)> create
Creates an MU ACL policy.
Syntax
Example
admin(network.wireless.acl.create)>show
Policy Name : Front Lobby
Policy Mode : allow
-----------------------------------------------------------------------------
index start mac end mac
-----------------------------------------------------------------------------
1 00A0F8334455 00A0F8334455
2 00A0F8400000 00A0F8402001
admin(network.wireless.acl.create)>set acl-name engineering
admin(network.wireless.acl.create)>set mode deny
admin(network.wireless.acl.create)>add-addr 00A0F843AABB
admin(network.wireless.acl.create)>add-policy
For information on configuring the ACL options available to the access point using the applet (GUI),
see “Configuring a WLAN Access Control List (ACL)” on page 126.
create show
<acl-name
>
Displays the parameters of a new ACL policy.
set acl-name
<index> Sets the MU ACL policy name.
mode
<acl-mode
>
Sets the ACL mode for the defined index
(1-16). Allowed MUs can access the Brocade
Mobility 7131N-FGR Access Point managed
LAN. Options are deny and allow.
add-addr <mac1> or
<mac1> <mac2>
Adds specified MAC address to list of ACL MAC
addresses.
delete <index>
<all> Removes either a specified ACL index or all ACL
entries.
add-policy
Completes the policy creation and exits the CLI.
..
Cancels the creation of the ACL and exits the
CLI.