Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 337
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.radio)> show
Displays the Brocade Mobility 7131N-FGR Access Point’s current radio configuration.
Syntax
Example
admin(network.wireless.radio)>show
Radio Configuration
Radio 1
Name : Radio 1
Radio Mode : enable
Radio Function : WLAN
RF Band of Operation : 802.11n(2.4 GHz)
Maximum MUs : 127
Wireless AP Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 6
Client Bridge Mode : disable
Roaming Client Bridge Mode : disable
Client Bridge WLAN : WLAN1
Mesh Connection Timeout : enable
Radio 2
Name : Radio 2
Radio Mode : enable
Radio Function : WIPS
RF Band of Operation : 802.11n(5 GHz)
Roaming Client Bridge Mode : disabled
Wireless Mesh Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 5
Client Bridge Mode : disable
Roaming Client Bridge Mode : enable
Client Bridge WLAN : WLAN1
Mesh Connection Timeout : enable
Dot11 Auth Algorithm : open-system-only
For information on configuring the Radio Configuration options available to the access point using
the applet (GUI), see “Setting the WLAN’s radio configuration” on page 137.
show
Displays the Brocade Mobility 7131N-FGR Access Point’s current radio configuration.