Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 341
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.radio.802-11n[2.4 GHz])>show
Displays specific 802.11n (2.4 GHz) radio settings.
Syntax
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>show radio
Radio Setting Information
Placement : indoor
MAC Address : 00A0F8715920
Radio Type : 802.11n (2.4 GHz)
ERP Protection : Off
HT Protection Mode : Pure HT
Channel Setting : user selection
Power Level : 5 dbm (4 mW)
802.11 rate compatibility mode : B, G, and N
Beacon Interval : 100 K-usec
DTIM Interval : 10 beacon intvls
short preamble : disable
RTS Threshold : 2341 bytes
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode : enable
Single Anetenna : disable
admin(network.wireless.radio.802-11n[2.4 GHz])>show rates
Basic Rates 1 2 5.5 11
Supported Rates 1 2 5.5 6 9 11 12 18 24 36 48 54
Short Guard Interval disable
-----------------------------------------------------------------------------
MCS Index Basic/Supported 20 MHz Rate 40 MHz Rate
-----------------------------------------------------------------------------
0 Supported 6.5 Mbps 13.5 Mbps
1 Supported 13.0 Mbps 27.0 Mbps
2 Supported 19.5 Mbps 40.5 Mbps
3 Supported 26.0 Mbps 54.0 Mbps
4 Supported 39.0 Mbps 81.0 Mbps
5 Supported 52.0 Mbps 108.0 Mbps
6 Supported 58.5 Mbps 121.5 Mbps
7 Supported 65.0 Mbps 135.0 Mbps
8 Supported 13.0 Mbps 27.0 Mbps
9 Supported 26.0 Mbps 54.0 Mbps
10 Supported 39.0 Mbps 81.0 Mbps
show radio
Displays specific 802.11n (2.4 GHz) radio settings.
rates
Displays specific 802.11n (2.4 GHz) radio rate settings.
aggr
Displays specific 802.11n (2.4 GHz) aggregation settings.
qos
Displays specific 802.11n (2.4 GHz) radio WMM QoS settings.