Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

342 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
11 Supported 52.0 Mbps 108.0 Mbps
12 Supported 78.0 Mbps 162.0 Mbps
13 Supported 104.0 Mbps 216.0 Mbps
14 Supported 117.0 Mbps 243.0 Mbps
15 Supported 130.0 Mbps 270.0 Mbps
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>show aggr
Radio Aggregation Settings
Enable Transmit A-MSDU :enable
Receive A-MSDU Buffer Limit :3839 bytes
Enable Transmit A-MPDU :enable
Transmit A-MPDU Size Limit :65536 bytes
Receive A-MPDU Size Limit :65536 bytes
Receive A-MPDU Minimum Spacing :0 usec
admin(network.wireless.radio.802-11n[2.4 GHz])>
admin(network.wireless.radio.802-11n[2.4 GHz])>show qos
Radio QOS Parameter Set 11n-default
-----------------------------------------------------------------------------
Access Category CWMin CWMax AIFSN TXOPs (32 usec) TXOPs ms
-----------------------------------------------------------------------------
Background 15 1023 7 0 0.000
Best Effort 15 63 3 31 0.992
Video 7 15 1 94 3.008
Voice 3 7 1 47 1.504
CAUTION
If you do NOT include the index number (for example, "set dtim 50"), the DTIMs for all four
BSSIDs will be changed to 50. To change individual DTIMs for BSSIDs, specify the BSS Index
number (for example, "set dtim 2 50). This will change the DTIM for BSSID 2 to 50.
For information on configuring the Radio 1 configuration options available to the access point
using the applet (GUI), see “Configuring a WLAN Access Control List (ACL)” on page 126.