Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

390 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.firewall)> show
Displays the Brocade Mobility 7131N-FGR Access Point firewall parameters.
Syntax
Example
admin(network.firewall)>show
Firewall Status : disable
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the access point using the applet
(GUI), see “Configuring firewall settings” on page 171.
show
Shows all Brocade Mobility 7131N-FGR Access Point firewall settings.