Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 391
53-1001947-01
Network commands
8
BR7131N>admin(network.firewall)> set
Defines the Brocade Mobility 7131N-FGR Access Point firewall parameters.
Syntax
Example
admin(network.firewall)>set mode enable
admin(network.firewall)>set ftp enable
admin(network.firewall)>set ip enable
admin(network.firewall)>set seq enable
admin(network.firewall)>set src enable
admin(network.firewall)>set syn enable
admin(network.firewall)>set win enable
admin(network.firewall)>show
Firewall Status : enable
Override LAN to WAN Access : disable
Configurable Firewall Filters
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192
max mime headers : 16
set mode
<mode> Enables or disables the firewall.
nat-timeout
<interval> Defines the NAT timeout value.
syn
<mode> Enables or disables SYN flood attack check.
src
<mode> Enables or disables source routing check.
win
<mode> Enables or disables Winnuke attack check.
ftp
<mode> Enables or disables FTP bounce attack check.
ip
<mode> Enables or disables IP unaligned timestamp check.
seq
<mode> Enables or disables sequence number prediction check.
mime filter
Enables or disables MIME flood attack check.
len
<length> Sets the max header length in bytes as specified by <length>
(with value in range 256 - 34463).
hdr
<count> Sets the max number of headers as specified in <count>
(with value in range 12 - 34463).