Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 393
53-1001947-01
Network commands
8
BR7131N>admin(network.firewall)> advanced
Displays whether an Brocade Mobility 7131N-FGR Access Point firewall rule is intended for
inbound traffic to an interface or outbound traffic from that interface..
Syntax
Example
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask Dst IP-Netmask TP SPorts DPorts Rev NAT Action
-----------------------------------------------------------------------------
1 1.2.3.4 2.2.2.2 all 1: 1: 0.0.0.0 deny
255.0.0.0 255.0.0.0 65535 65535 nat port 33
2 33.3.0.0 10.10.1.1 tcp 1: 1: 11.11.1.0 allow
255.255.255.0 255.255.255.0 65535 65535 nat port 0
For information on configuring the Firewall options available to the access point using the applet
(GUI), see “Configuring firewall settings” on page 171.
show
Shows advanced subnet access parameters.
set
Sets advanced subnet access parameters.
import
Imports rules from subnet access.
inbound
Goes to the Inbound Firewall Rules submenu.
outbound
Goes to the Outbound Firewall Rules submenu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to flash memory.
quit
Quits and exits the CLI session.