Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

498 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
System commands
8
BR7131N>admin(system.fw-update)>update
Executes the Brocade Mobility 7131N-FGR Access Point firmware update over the WAN or LAN port
using SFTP.
Syntax
NOTE
The access point must complete the reboot process to successfully update the device firmware,
regardless of whether the reboot is conducted uing the GUI or CLI interfaces.
admin(system.fw-update)>update sftp
For information on updating access point device firmware using the applet (GUI), see “Updating
device firmware” on page 94.
update <mode><iface>
Defines the sftp mode used to conduct the firmware update. Specifies whether the
update is executed over the Brocade Mobility 7131N-FGR Access Point’s WAN, LAN1
or LAN2 interface <iface>.