Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

Brocade Mobility 7131N-FGR Product Reference Guide 505
53-1001947-01
System commands
8
BR7131N>admin(stats)> send-cfg-ap
Copies the Brocade Mobility 7131N-FGR Access Point’s configuration to another Brocade Mobility
7131N-FGR Access Point within the known AP table.
Syntax
Example
admin(stats)>send-cfg-ap 2
admin(stats)>
NOTE
The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN
IP data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI),
see “Viewing known access point statistics” on page 240.
send-cfg-ap
<index> Copies the Brocade Mobility 7131N-FGR Access Point’s configuration to the
Brocade Mobility 7131N-FGR Access Points within the known AP table. Mesh
configuration attributes do not get copied using this command and must be
configured manually.