Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) Manual

46 Brocade Mobility 7131N-FGR Product Reference Guide

53-1001947-01

Basic configuration

NOTE

The System Name and Country are also configurable within the System Settings screen. Refer to

“Configuring system settings” on page 56 (if necessary) to set a system location and admin email

address for the Brocade Mobility 7131N-FGR Access Point or to view other default settings.

4. Refer to the new Radio Configuration field to define how WLAN and WIPS are supported by the

access point’s radio(s). Remember, the options available depend on the radio model SKU

deployed.

A dual radio model access point displays 7 configuration options. Refer to the following table

for the options available to dual radio models.

5. Select the Quick Setup screen’s Network Configuration tab to define a minimum set of WAN or

LAN configuration values. The WAN tab displays by default.

Radio Button Brocade Mobility 7131N-FGR Access Point Dual Radio SKU

2.4 GHz WLAN,

& Sensor

Radio1 WLAN,

Radio 2 WIPS

5.0 GHz WLAN

& Sensor

Radio 1 WIPS,

Radio 2 WLAN

2.4 GHz WLAN &

5.0 GHz WLAN only - no Sensor

Radio 1 WLAN,

Radio 2 WLAN

Sensor only Spectrum Analysis mode

(no WLAN)

Radio 1 WIPS,

Radio 2 WIPS

2.4 GHz WLAN - no Sensor Radio1 WLAN,

Radio 2 Disabled

5.0 GHz WLAN - no Sensor Radio1 Disabled,

Radio 2 WLAN

Radios Off Radios 1 and 2 Disabled