Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

278 Brocade Mobility Access Point System Reference Guide

53-1003100-01

FIGURE 141 Device Overrides - WLAN Mapping tab

Refer to the WLAN/BSS Mappings field to set or override WLAN BSSID assignments for an existing

access point deployment. Use the ‘<‘ or ‘>’ buttons to assign WLANs and mesh points to the

available BSSIDs.

Administrators can assign each WLAN its own BSSID. If using a single-radio Brocade Mobility 6511

Access Point, there are 8 BSSIDs available. If using a dual-radio Brocade Mobility 1220 Access

Point, Brocade Mobility 1220 Access PointM, Brocade Mobility 1240 Access Point, Brocade

Mobility 7131 Access Point, there are 16 BSSIDs for the 802.11b/g/n radio and 16 BSSIDs for the

802.11a/n radio.

Select OK to save the changes and overrides to the WLAN Mapping. Select Reset to revert to the

last saved configuration.

Select the Legacy Mesh tab.