Administrators Guide (Supporting Fabric OS v7.3.0) Manual

1. Connect to the switch and log in using an account with admin permissions.
2. Enter logicalGroup --addmember group_name -member member_list
The element you want to add must be the same type as those already in the group (port, circuit, or
SFP transceiver).
You can specify either a single port, or specify multiple ports as either individual IDs separated by
commas, or a range where the IDs are separated by a hyphen.
3. Optional: Enter logicalGroup --show group_name to see the members of the named group.
The following example adds the ports 31 and 41 to the critical_ports group.
switch:admin> logicalgroup --addmember critical_ports -members "31,41"
Listing this group produces the following output.
switch:admin> logicalgroup --show critical_ports
---------------------------------------------------------------------
Group Name |Predefined |Type |Member Count |Members
---------------------------------------------------------------------
critical_ports |No |Port |5 |10,15,25,31,41
If ports 15 and 41 go offline, the following output would result.
switch:admin> logicalgroup --show critical_ports
---------------------------------------------------------------------
Group Name |Predefined |Type |Member Count |Members
---------------------------------------------------------------------
critical_ports |No |Port |4 |10,25,31,41
NOTE
Port 41 is still considered part of the critical_ports group, even if it is offline.
Adding missing ports to a group
You can add ports to a predefined group (for example, ALL_HOST or ALL_TARGET) that may not have
been included automatically.
NOTE
The same restrictions as described in Adding a port to an existing group on page 66 apply.
1. Enter logicalGroup --show group_name.
2. Enter logicalGroup --addmember group_name -member member_list to add the specified port to
the named group.
You can specify either a single port, or specify multiple ports as either individual IDs separated by
commas, or a range where the IDs are separated by a hyphen. Either port names or WWNs can be
used, not both. Quotation marks around the member_list value are optional.
3. Optional: Enter logicalGroup --show group_name to confirm the addition.
Adding missing ports to a group
Monitoring and Alerting Policy Suite Administrator's Guide 67
53-1003147-01